| |
| |
SYSTEM TYPE:
HIDDEN ANCHORING |
TYPES OF CLADDING TILES:
- Ceramic tiles, simple or multi-layer;
- Laminate tiles;
- Fibercement tiles;
- Natural stone tiles;
- Other materials that can be worked on the backside.
|
WORKINGS ON TILE:
small holes on the backside |
|
Download
the description of "GIOVE" system |
|
SYSTEM COMPONENTS:
“Giove”
system is made of the following components:
- extruded profile, “CV1m” in aluminium alloy, EN
6060 T5 (or similar, when needed);
- extruded profile, “G1” in aluminium alloy, EN 6060
T5;
- tile retaining hooks, “G2”,obatained from extruded
aluminium alloy, EN 6060 T5;
- “G3” device and adjusting screw, in stainless steel
EN 1.4310 (AISI 301);
- horizontal rail retaining hooks, “CD4c” in stainless
steel EN 1.4310 (AISI 301);
- retaining springs , type “V7”, in stainless steel
EN 1.4310 (AISI 301);
- standard fixing brackets, simple bracket “A12” and
double bracket “B12” obtained from extruded
aluminium alloy, EN 6060 T5;
- nuts and bolts in stainless steel, class A2;
- anchor bars, mechanical or epoxy-resin based, when needed;
- tile fixing device, placed on the backside of the tile, in the
appropriately made holes, in stainless
steel, class A2;
- insulation springs in tempered stainless steel, to support insulating
panels, when needed.
|
| |
|
|
|
| |
| |
SYSTEM DESCRIPTION:
This system is based on the aluminium sub-frame made out of vertical
rails “CV1m”, placed on design pace and horizontal rails
“G1”, placed on design pace, which depend on the dimensions
of the tiles.
The “CV1m” profile is designed and shaped in order to
fit without drillings the following components:
- standard fixing brackets, simple bracket “A12”
and double bracket “B12”, placed on design pace;
- two hooks “CD4c” and two retaining springs “V7”,
in order to fix and retain horizontal rail “G1”;
- insulation springs, when needed or requested.
The “G1” profile is designed and shaped
in order to fit without drillings the “G2” hook designed
to retain the cladding tiles, and the “G3” device with
its adjusting screw.
Total absence of the holes on vertical and horizontal rails protects
coating (oxidation or painting) from corrosion and assure to the
structure a longer lifetime.
The main characteristic of “Giove” system is that entire
tile anchoring and supporting mechanism is hidden and not visible.
This is assured using appropriate number of anchoring devices placed
on the backside of the tile. The number of devices can vary and
depend on the real dimensions of cladding tiles and effective design
loads. They are placed near top and bottom edges of each tile.
On the backside of each tile small holes are made; in these holes
is placed mechanical insert-screw, able to resist to the pull-out
loads, and it allow the anchoring of the “G2” hooks.
In this way these hooks are solidly united with the tile and the
tile can be placed and hooked-on to the horizontal rail profile
“G1”.
“G3” device and its screw are designed in order to allow
millimetric height adjustments, acting simply on superior “G2”
hooks.
When the supporting sub-frame is placed and assembled, each cladding
tile can be placed, set-up and displaced singularly.
The supporting sub-frame allow any type of horizontal and vertical
regulations and the thermal expansion off all components.
|
| |
SYSTEM SIZE AND DIMENSIONS:
- The standard distance between the wall and the internal face
of the tile is 140 mm, with a standard regulation of ±
25 mm.
- The standard thickness of the tiles for this system should be
approximately 8 ÷ 20 mm.
Standard details of the system in the next page. |
| |
| NOTE: THE EFFECTIVE COMPONENTS CAN BE CHANGED DURING
THE DESIGN PHASE. |
| |
|
| |
|
| |
|
|
 |
