demo
Home Page
Company profile

What we make
Additional services
Planning
Systems
Photo gallery
Contact us
- - - - - - - - - -
 
 
TYPE OF SYSTEM:
VISIBLE ANCHORING 		TYPES OF COVERING SHEETS:
  • large synthetic laminate sheets;
  • large asbestos lumbers;
  • other large-size thin materials that can be drilled.
SHEET TREATMENTS:
through drilling
Download the description of "SIRIO" system


SYSTEM COMPONENTS:
"SIRIO" system consists of the following elements:
  • "ET1" and "ET1m" extruded sections in EN 6060 T5 alloy (or similar upon need);
  • EN 6060 T5 aluminium rivets with big head to fix the sheet to the section (or other screws depending on design);
  • "A12" and "B12" standard bearing brackets made in EN 6060 extruded aluminium;
  • fixing screws of "ET1" and "ET1m" sections to the brackets, stainless steel of Class A2;
  • anchoring mechanical or chemical resin small blocks to fix the brackets to the wall support, upon need; neoprene band seal to integrate the sheet with sections of different thickness depending on needs.
 
Asilo di Caslino (CO)
Edilgros (TO)
Ediliriivek (CO)
Fudex a Settimo (TO
 
 
DESCRIPTION OF THE SYSTEM
The system includes the assemblage of the "ET1" aluminium vertical section with a pitch depending on the width of the covering sheet in addition to the design runout and the mounting of "ET1m" section in the intermediate submultiples pitches established depending on the effective width of the sheets and the assemblage instructions.

"ET1" and "ET1m" vertical sections are shaped in order to:
  • housing without drilling the fixing brackets to be screwed to the wall by means of stainless steel bolts in line with the design pitch;
  • supplying a suitable laying surface to the sheets and a sturdy point for the application of rivets (or other screws) to fix sheets.

Sections can be raw or electrocoloured, upon request.

The sheet is integrated with the frame by means of interposition of a neoprene seal with suitable thickness and the application of silicone points, where necessary.

The main characteristic of the "Sirio" system is that sheets are mounted on the front part by means of rivets that are visible from outside; thus sheets must be drilled before laying. The drilling diagram of sheets with the sizes of holes and their positions is made in line with the technical instruction given by the companies producing sheets to guarantee the optimal utilization of sheets and their longest life.

Depending on the architectonical instructions, rivets (or the other fixing materials) can be raw or painted of the same colour of the sheets to result almost invisible also from close.
 
VOLUMES:
  • the standard trailing edge is 110 mm plus the thickness of the covering sheets with a standard adjustment of ± 25 mm.
  • the covering sheet standard thickness for this type of system is 6/10 mm.
The diagram of the standard system is shown in the Document Attached.
 
NOTE: THE EFFECTIVE COMPONENTS CAN BE ADJUSTED DURING THE DESIGN PHASE.